To ensure a smooth and safe assembly process, follow these helpful guidelines:
Plan Ahead and Work Safely
- Involve at Least Two Adults: Lifting beams, frames, and heavy parts safely requires two people.
- Check Estimated Assembly Time: Plan your time effectively by referring to the front page of the assembly instructions.
- Create a Safe Workspace: Keep the area clean, clutter-free, and well-lit. Avoid assembling in bad weather.
Follow the Design Precisely
- Stick to the original design provided in the instructions.
- Altering or deviating from the plans can compromise safety.
Proper Drilling and Fastening
-
Drill Pilot Holes: Prevent wood splitting by drilling pilot holes before inserting screws:
- 3.5 mm drill bit for regular wood screws.
- 5 mm hole for stealth fasteners (through both parts being joined).
- 10 mm hole for bolt connections.
- Pilot Hole Depth: Ensure pilot holes are about 10 mm shorter than the screw length to prevent over-penetration.
Secure Hardware Correctly
- Flush Screws: Ensure screw heads sit flush with the wood surface to avoid protruding edges that could cause injuries.
- Avoid Over-Tightening: Tighten just enough to hold firmly without crushing the wood, which could cause splitting or splinters.
Correctly Orient Swing Hangers
- Align the swing hangers exactly as shown in the manual for smooth motion and to prevent premature wear or failure.
By following these steps, you’ll ensure a safe, efficient, and enjoyable assembly process. If you have any questions or need help, our support team is always here to assist you!